Onyx II® Model 9560 Bluetooth® Fingertip Oximeter OEM Specification and Technical Information NONIN® Medical, Inc. 13700 1st Avenue North P
6 Data Packet Description The 9560 includes 6 bytes of header information, a minimum of 14 bytes of spot-check data, and 2 bytes of footer informa
7 Data Format #13 Data Packet Description (continued) Status (MSB) BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0 R R R R R R SPA NOM
8 Serial Date Format #2: This data format provides continuous data transmission of a 5 byte data packet sent 75 times per second. The data packet
9 Byte 1 – START BYTE: Always set to a 01 value. Byte 2 – STATUS BYTE This byte provides status information at a rate of 1/75th of second. R
10 Byte 4 – FLOAT BYTE This byte is used for SpO2, Pulse Rate, and information that can be processed at a rate of 1/3 of second. Range: 00 to 12
11 HR Format: 7 6 5 4 3 2 1 0 HR MSB 0 R R R R R HR8 HR7 7 6 5 4 3 2 1 0 HR LSB 0 HR6 HR5 HR4 HR3 HR2 HR1 HR
12 Serial Data Format #7: This data format provides the same information as Data Format 2, except that the waveform value provides the full resolu
13 Byte 1 – STATUS BYTE This byte provides status information at a rate of 1/75th of a second. Range: 128 to 255 Byte 1 - Status BIT7 BIT6
14 Byte 4 – FLOAT BYTE This byte is used for SpO2, Pulse Rate, and information that can be processed at a rate of 1/3 of second. Range: 00 to 1
15 Formatted for Display Purposes: These values are formatted for display purposes every 1.5 seconds. They provide the most reliable reading p
16 Serial Data Format #8 This data format provides continuous data transmission of a 4 byte data packet sent once per second. The data packet incl
17 The SpO2 and Pulse Rate values are formatted for display purposes every 1.5 seconds. They provide the most reliable reading possible durin
18 Indications for Use The NONIN® Model 9560 Finger Pulse Oximeter is a small, lightweight, portable, wireless device indicated for use in measuri
19 Cautions artificial nails or fingernail polish The device may not work when circulation is reduced. Warm or rub the finger, or re-posit
20 Regulatory Information Declaration of Conformity with FCC and Canadian Ministry of Health Rules for Electromagnetic Compatibility Nonin Medi
21 Using the Model 9560 Guide to Symbols on the Module Consult Instructions for Use. Caution! Type BF Applied Part (Patient isolation from
22 4. Carefully guide the battery cover back onto the Model 9560, pressing downward and pushing inward slightly to re-secure the battery cover.
23 Model 9560 Care, Maintenance, and Cleaning The advanced digital circuitry within the Model 9560 requires no calibration or periodic mainten
24 Manufacturer’s Declaration See the following tables for specific information regarding this module’s compliance to IEC 60601-1-2:2001. Table 1
25 Table 3: Guidance and Manufacturer’s Declaration—Electromagnetic Immunity Immunity Test IEC 60601 Test Level Compliance Level Electromagnet
i Table of Contents NONIN® Onyx II Model 9560 Bluetooth® Fingertip Oximeter Technology Specifications ... 1 Input/Output For
26 Table 4: Recommended Separation Distances The following table describes the recommended separation distances between portable and mobile RF com
27 Testing Summary SpO2 accuracy, motion and low perfusion testing was conducted by NONIN® Medical, Incorporated as described below. SpO2 Accu
1 NONIN® Onyx II Model 9560 Bluetooth® Fingertip Oximeter Technology Specifications 1. Oxygen Saturation Range (SpO2) 0 to 100% 2. Pulse R
2 13. Bluetooth Information Bluetooth Compliance: Operating Frequency: Output Power: Operating Range: Network Topology:
3 Input/Output Formatting Options Data Format Solutions The 9560 features four data format solutions. They are: Data format 13 – provides e
4 Selecting the Data Format To select the data format the host must send the 9560 the following 6 byte command string: Byte 1 Byte2 Byte3 B
5 Retrieving Time from the 9560 To retrieve the time from the 9560, the host must send a 4 byte command string. Response: The 9560 sends
Commentaires sur ces manuels